AI-generated analysis, not investment advice. The articles are written by AI, edited, and checked against company filings — but the judgements are opinions and the figures go stale. How this is made · Terms

Parts, Many of Them ProprietaryWide moat

Deere & Company (DE) — moat facet

Deere sells parts, many of them proprietary, for every machine it has ever built, and the equipment gross margin held at 27.6% at the bottom of the cycle.

The machine is sold once; it is repaired for decades. Deere describes the business plainly: "We supply parts, many of which are proprietary, to support the current product lines as well as products we have sold in the past"1. It also sells maintenance and repair contracts and warranty extensions2.

Deere equipment net sales less cost of sales, as a share of net sales (%)32.1FY202331.2FY202427.6FY2025Deere Form 10-K FY2025; net sales less consolidated cost of sales
A 30% fall in sales took less than five points off the margin.

What Deere does not do is report how big the parts business is. There is no parts revenue line in the 10-K. The only number offered on the third-quarter call came from an analyst, who referred to "$2 billion to $3 billion" related to Life Cycle parts over five years3; that is the analyst's figure, not the company's.

The parts business shows up indirectly, in how the equipment gross margin behaves through the cycle. Net sales less cost of sales was $17,850 million in fiscal 2023 and $10,758 million in fiscal 2025, a margin of 32.1% at the peak and 27.6% at the trough4. Deere does not say why the margin held, but part of the cushion is probably the parts and service demand from a fleet that keeps working whether or not anyone buys a new tractor.

The weakness is that a modern machine's electronics need Deere's software to repair, and Deere has just agreed to share repair tools with independent shops, the subject of Independent Repair Shops, Now Equipped by Deere. A proprietary part is only valuable if only the dealer can fit and program it.

Deere also sells the service around the part. Its aftersales customer assistance programs provide "a range of maintenance and repair contracts, as well as warranty extension services"5, and in the U.S. and Canada extended equipment warranties are written by subsidiaries inside the financial services segment6. The bank, in other words, earns from the aftermarket too.

The best available test is the gross margin. It stayed above 25% of net sales through fiscal 2025; a reading below that in a year without a new downturn would mean the aftermarket has lost its pricing.

Moat trajectory: Narrowing

The FTC order opens repair tools to independent shops for ten years.

The number that tests this moat
Moat Explorer calc
Equipment gross margin (net sales less cost of sales)
27.6% (FY2025: $10,758M on $38,917M), from 31.2% in FY2024 and 32.1% in FY2023

The only place the aftermarket shows in the accounts; below 25% without a new downturn would mean parts pricing is weakening.

How it's calculated: Equipment operations net sales less consolidated cost of sales, divided by equipment net sales, Deere Form 10-K FY2025.
Source: Moat Explorer calculation from Deere & Company filings ↗
⚠ Threats to the moat
References
  1. ReportedDeere describes the business plainly: "We supply parts, many of which are proprietary, to support the current product lines as well as products we have sold in the past".
    Deere & Company Form 10-K for fiscal 2025 (year ended 2 November 2025), $ millions - Item 1 business: dealers, distribution, parts, used-equipment trade-ins, sales incentives and manufacturing. — FY2025 · publ. 18 December 2025 · source ↗
  2. ReportedIt also sells maintenance and repair contracts and warranty extensions.
    Deere & Company Form 10-K for fiscal 2025 (year ended 2 November 2025), $ millions - selected financial data, MD&A and the supplemental consolidating data for equipment operations and financial services. — FY2025 · publ. 18 December 2025 · source ↗
  3. ReportedThere is no parts revenue line in the 10-K. The only number offered on the third-quarter call came from an analyst, who referred to "$2 billion to $3 billion" related to Life Cycle parts over five years; that is the analyst's figure, not the company's.
    Deere & Company third-quarter fiscal 2026 earnings call, FactSet corrected transcript - engaged and highly engaged acres, See & Spray adoption, early order programs, construction backlogs, tariffs, equipment cash flow guidance and the FTC settlement - outlook, early order programs, construction backlogs, tariffs, cash flow and the FTC settlement. — Q3 FY2026 · publ. 20 August 2026 · source ↗
  4. Moat Explorer calcNet sales less cost of sales was $17,850 million in fiscal 2023 and $10,758 million in fiscal 2025, a margin of 32.1% at the peak and 27.6% at the trough.
    Moat Explorer calculation from Deere & Company reported figures ($ millions unless stated; fiscal years end on the Sunday nearest 31 October). Cycle: net income FY2025 over FY2023 5,027 / 10,166 - 1 = -50.6%; net sales and revenues 45,684 / 61,251 - 1 = -25.4%; FY2025 over FY2024 45,684 / 51,716 - 1 = -11.7%; equipment net sales 38,917 / 55,565 - 1 = -30.0%; Production & Precision Ag sales 17,311 / 26,790 - 1 = -35.4%, FY2025 over FY2024 17,311 / 20,834 - 1 = -16.9%; Small Ag & Turf 10,224 / 13,980 - 1 = -26.9%; Construction & Forestry 11,382 / 14,795 - 1 = -23.1%; PPA operating profit 2,671 / 6,996 - 1 = -61.8%; PPA sales 2020-2023 26,790 / 12,962 = 2.07 times, more than double; PPA U.S. net sales and revenues 7,753 / 13,917 - 1 = -44.3%; U.S. net sales and revenues 23,974 / 34,105 - 1 = -29.7%; Latin America 5,607 / 8,197 - 1 = -31.6%; production agriculture product line 16,960 / 26,450 - 1 = -35.9%; roadbuilding 3,552 / 3,794 - 1 = -6.4%; roadbuilding over Construction & Forestry net sales 3,552 / 11,382 = 31.2%. Construction & Forestry product lines FY2023 to FY2025: construction 4,570 / 6,842 - 1 = -33.2%; compact construction 1,922 / 2,451 - 1 = -21.6%; forestry 1,124 / 1,429 - 1 = -21.3%; roadbuilding -6.4%. Segment margins (operating profit over segment net sales): PPA 2020 1,969 / 12,962 = 15.2%; 2021 3,334 / 16,509 = 20.2%; 2022 4,386 / 22,002 = 19.9%; 2023 6,996 / 26,790 = 26.1%; 2024 4,514 / 20,834 = 21.7%; 2025 2,671 / 17,311 = 15.4%. SAT 2020 1,000 / 9,363 = 10.7%; 2021 2,045 / 11,860 = 17.2%; 2022 1,949 / 13,381 = 14.6%; 2023 2,472 / 13,980 = 17.7%; 2024 1,627 / 10,969 = 14.8%; 2025 1,207 / 10,224 = 11.8%. CF 2020 590 / 8,947 = 6.6%; 2021 1,489 / 11,368 = 13.1%; 2022 2,014 / 12,534 = 16.1%; 2023 2,695 / 14,795 = 18.2%; 2024 2,009 / 12,956 = 15.5%; 2025 1,028 / 11,382 = 9.0%. Equipment operations operating profit 2,671 + 1,207 + 1,028 = 4,906 (FY2025), 4,514 + 1,627 + 2,009 = 8,150 (FY2024), 6,996 + 2,472 + 2,695 = 12,163 (FY2023); equipment operating margin 4,906 / 38,917 = 12.6%, 8,150 / 44,759 = 18.2%, 12,163 / 55,565 = 21.9%; first nine months FY2026 (1,372 + 1,538 + 1,134 = 4,044) / 30,779 = 13.1%; Q3 FY2026 527 + 622 + 436 = 1,585 against Q3 FY2025 580 + 485 + 237 = 1,302, an increase of 283. Nine-month operating profit change: PPA 1,372 / 2,066 - 1 = -33.6%; SAT 1,538 / 1,182 - 1 = +30.1%; CF 1,134 / 681 - 1 = +66.5%. PPA share of segment operating profit FY2023 6,996 / 12,958 = 54.0%; FY2025 2,671 / 6,020 = 44.4%. FS segment operating profit 1,114 / 795 - 1 = +40.1%. Equipment gross margin (net sales less consolidated cost of sales): FY2023 55,565 - 37,715 = 17,850, / 55,565 = 32.1%; FY2024 (44,759 - 30,775) / 44,759 = 31.2%; FY2025 38,917 - 28,159 = 10,758, / 38,917 = 27.6%. Equipment share of net sales and revenues 38,917 / 45,684 = 85.2% (FY2025); 55,565 / 61,251 = 90.7% (FY2023). Financial Services band (total net sales and revenues less equipment net sales): 2020 35,540 - (12,962 + 9,363 + 8,947 = 31,272) = 4,268; 2021 44,024 - (16,509 + 11,860 + 11,368 = 39,737) = 4,287; 2022 52,577 - (22,002 + 13,381 + 12,534 = 47,917) = 4,660; 2023 61,251 - 55,565 = 5,686; 2024 51,716 - 44,759 = 6,957; 2025 45,684 - 38,917 = 6,767 = finance and interest income 5,748 + other income 1,019; share of revenue 6,767 / 45,684 = 14.8% (FY2025), 5,686 / 61,251 = 9.3% (FY2023). Financial Services share of consolidated assets 70,021 / 105,996 = 66.1%; share of net income 890 / 5,027 = 17.7%; return on equity 890 / ((7,069 + 7,454) / 2 = 7,262) = 12.3%; Financial Services borrowings 13,382 + 6,595 + 34,788 = 54,765; consolidated borrowings 13,796 + 6,596 + 43,544 = 63,936; FS share 54,765 / 63,936 = 85.7%; Financial Services equity over assets 7,069 / 70,021 = 10.1%, about a tenth (debt to equity 8.6 to 1). Interest compensation to Financial Services 414 / 687 - 1 = -39.7%. Financing receivables 44,575 (about $44.6bn) / 23,702 = 1.88 times. Write-offs six months FY2026 150 / 44,575 = 0.3%. Equipment operations: net debt 9,171 - 6,557 = 2,614 (FY2025); 2,614 / 4,137 = 0.63 years of net income, less than eight months; return on invested capital estimate FY2025 (4,137 + 372 x 0.8 = 4,435) / (18,887 + 9,171 - 6,557 = 21,501) = 20.6%; FY2024 (6,404 + 396 x 0.8 = 6,721) / (15,389 + 7,516 - 5,740 = 17,165) = 39.2%; 20% tax on interest is an approximation. Equipment operations cash flow 5,100 / 11,919 - 1 = -57.2%. Costs and people: R&D over equipment net sales 2,177 / 55,565 = 3.9% (FY2023), 2,290 / 44,759 = 5.1% (FY2024), 2,311 / 38,917 = 5.9% (FY2025), 1,704 / 30,779 = 5.5% (nine months FY2026); nine-month R&D 1,704 / 1,631 - 1 = +4.5%; R&D at the FY2023 ratio 38,917 x 3.9% = about 1,520, difference 2,311 - 1,520 = about 790, about 2 points of 38,917. Employees 82,956 - 73,146 = 9,810, about 9,800, 9,810 / 82,956 = 11.8%. Tariff cost about 600 / 4,906 = 12.2% of equipment operating profit; 1,100 / 4,906 = 22%, about a fifth. Trade receivables 7,723 / 6,103 - 1 = +26.5%. Wirtgen first-year operating profit 116 / 5,327 = 2.2%; CF operating profit 1,028 / 5,327 = 19.3%, about a fifth; CF goodwill 3,051 / 4,188 = 72.9%. Tenna goodwill 286 / 439 = 65%. Backlog CF 3.8 / 2.2 - 1 = +73%. Engaged acres per connected machine 520 million / 1.2 million = about 433. Capital returns: cash returned FY2023 dividends paid 1,427 + repurchases 7,216 = 8,643; FY2025 1,720 + 1,138 = 2,858; 2,858 / 8,643 - 1 = -66.9%; diluted shares 271.7 / 316.6 - 1 = -14.2%; dividend payout 6.48 / 18.50 = 35.0%. Fiscal 2016 net margin 1,523.9 / 26,644.0 = 5.7%. Diluted EPS FY2025 over FY2023 18.50 / 34.63 - 1 = -46.6%. Equipment segment identifiable assets 8,787 + 3,987 + 7,792 = 20,566, over Financial Services 70,021 = 29.4%, less than a third. Valuation: trailing twelve months to 2 August 2026 net sales and revenues 45,684 - 33,290 + 35,589 = 47,983; net income 5,027 - 3,962 + 3,808 = 4,873; diluted EPS 18.50 - 14.57 + 14.06 = 17.99; P/E 185,230 / 4,873 = 38.0; P/S 185,230 / 47,983 = 3.86; market value over FY2023 net income 185,230 / 10,166 = 18.2 times; market value change since FY2025 year end 185,230 / 124,792 - 1 = +48.4%; trailing net income 4,873 / 5,027 - 1 = -3.1%; analyst target 691.83 / 687.00 - 1 = +0.7%; Deere over CNH and AGCO 185.23 / (16.67 + 8.03 = 24.70) = 7.5 times; Deere over Caterpillar 185.23 / 388.62 = 47.7%, about half; Caterpillar over Deere 388.62 / 185.23 = 2.1 times. Year-end P/E and P/S: 2015 24.15bn / 1,940 = 12.45, / 28,863 = 0.837; 2016 32.65 / 1,524 = 21.42, / 26,644 = 1.225; 2017 50.49 / 2,159 = 23.39, / 29,738 = 1.698; 2018 47.52 / 2,368 = 20.07, / 37,358 = 1.272; 2019 54.28 / 3,253 = 16.69, / 39,258 = 1.383; 2020 84.31 / 2,751 = 30.65, / 35,540 = 2.372; 2021 106.137 / 5,963 = 17.80, / 44,024 = 2.411; 2022 119.777 / 7,131 = 16.80, / 52,577 = 2.278; 2023 104.011 / 10,166 = 10.23, / 61,251 = 1.698; 2024 111.610 / 7,100 = 15.72, / 51,716 = 2.158; 2025 124.792 / 5,027 = 24.82, / 45,684 = 2.732. Guidance: fiscal 2026 net income midpoints (4,000 + 4,750) / 2 = 4,375 (November 2025); (4,500 + 5,000) / 2 = 4,750 (February and May 2026); (4,750 + 5,000) / 2 = 4,875, $4.875bn (August 2026); 4,875 / 5,027 - 1 = -3.0%; nine months 3,808 / 4,875 = 78.1%; implied fourth quarter 4,750 - 3,808 = 942 to 5,000 - 3,808 = 1,192. U.S. share of net sales and revenues 23,974 / 45,684 = 52.5% (FY2025), 34,105 / 61,251 = 55.7% (FY2023) - segments, product lines, margins and backlog. — FY2015-Q3 FY2026 · publ. October 2026 · source ↗
    Method: Arithmetic on figures reported in Deere & Company Forms 10-K, 10-Q, results releases, the 2026 proxy statement, the Q3 FY2026 call, and stockanalysis.com market data; each operand is stated in the source line.
  5. ReportedIts aftersales customer assistance programs provide "a range of maintenance and repair contracts, as well as warranty extension services", and in the U.S. and Canada extended equipment warranties are written by subsidiaries inside the financial services segment.
    Deere & Company Form 10-K for fiscal 2025 (year ended 2 November 2025), $ millions - Financial Services: John Deere Capital Corporation, financing receivables, credit quality, interest-free periods, the support agreement and Banco John Deere. — FY2025 · publ. 18 December 2025 · source ↗
  6. ReportedIts aftersales customer assistance programs provide "a range of maintenance and repair contracts, as well as warranty extension services", and in the U.S. and Canada extended equipment warranties are written by subsidiaries inside the financial services segment.
    Deere & Company Form 10-K for fiscal 2025 (year ended 2 November 2025), $ millions - Financial Services: John Deere Capital Corporation, financing receivables, credit quality, interest-free periods, the support agreement and Banco John Deere. — FY2025 · publ. 18 December 2025 · source ↗
Sources
Generated October 5, 2026